Since its release in the summer of 2011 the macho is considered the first choice when a particularly powerful and quiet CPU cooler is sought. The optimized for silent operation design of the heat sink is based on decades of experience and development of our engineers. Diverse offered under different brand names in the market copies confirm the ingenuity of our design. 

We could not hold the world's leading position if we do not work continuously to improve our products. True to the motto "innovated - not imitated" We use the Macho Rev. B specifically to improvements to optimize an outstanding product on. 

Based on the highly decorated by the press "IB-E" flagships Silver Arrow and Archon X2 macho also has in revision B on a significantly enlarged, nickel-plated and highly polished base in the dimension 53 x 40 mm. 

With this - otherwise only reservation of our high-end models detail - the cooling capacity of the radiator was again increased significantly and performance advantage over competing models can be further increased. So the macho Rev. B i7 high-performance processors with up to 8 cores well prepared for current Intel Core. 

The macho Rev. B has also been visually enhanced: The copper heatpipes are nickel plated for the new revision and result in conjunction with the black anodized Top Fin a probably unique elegant appearance. 

Another new feature of the Macho Rev. B concerns the supplied fan. The cooler is supplied as standard with the temperature-controlled fan TY 147 A (PWM). At a speed from 300 to 1300 U / min (+/- 15%) of the TY 147 A is again significantly less noise than the previous model (TY 147: 900-1300 U / min). Thus, the macho Rev. B in normal operation from the outside is virtually imperceptible. 

The TY 147 A is equipped with a low-wear "Enhanced Hyper-Flow Bearing". The capacity of the optimized for ultra-silent operation of the fan varies between 29 and impressive 125 m³ / h at a noise level of 15 - 21 dB (A). The proven fan with its unique design features mounting points of a conventional 120 mm fan and it has a larger inner diameter than conventional 140 mm fan on. The fan is mounted securely with the enclosed revised brackets to the heatsink - self-adhesive anti-vibration pads for a decoupled mounting are included. 

At the request of many customers, there are four special brackets for the fan Thermalright TY fan supplied, so that a second fan can be mounted. 

The original concept of the Macho was maintained: The heat sink is aligned in the direction of the housing rear wall to avoid incompatibilities with the use of memory modules with high-building heat spreaders. The aluminum cooling fins are provided with a plurality of air holes, which counteract air accumulation between the individual cooling fins. 

An especially low air resistance also is realized through the special design of the aluminum fins of the heat sink. The oval air duct in the middle of the cooler provides for controlled air turbulence within the heat sink, whereby the heat can be dissipated more effectively. 

As with all high-performance coolers from our company in which resorted Macho B in the revision of the well-proven heatpipe technology. Equal to six high-performance heat pipes 6 mm provide an especially efficient dissipation of the processor waste heat. The heat pipes are firmly integrated into the nickel-plated copper base to ensure the most effective heat dissipation. 

The macho Rev. B is supplied with a universal mounting kit that all current Intel - supported and AMD platforms (Intel LGA775 / 1366/1156/1155/2011/ 1150 / 2011-3 / 1151 * and AMD AM2 / AM2 + / AM3 / FM1 / FM2 / FM2 +). 

To simplify make the installation of the cooler with already installed motherboard can be found in the accessories again, of course, the popular Screwdriver with a magnetic tip. Installation is simple and self-explanatory - a mounting instruction (English & German) is included. The delivery is completed by the quality Chill Factor thermal compound (blister). The all current Intel - and AMD platforms (Intel LGA775 / 1366/1156/1155/2011/1150 / 2011-3 / 1151 * and AMD AM2 / AM2 + / AM3 / FM1 / FM2 / FM2 +). To simplify make the installation of the cooler with already installed motherboard can be found in the accessories again, of course, the popular Screwdriver with a magnetic tip. Installation is simple and self-explanatory - a mounting instruction (English & German) is included. The delivery is completed by the quality Chill Factor thermal compound (blister). The all current Intel - and AMD platforms (Intel LGA775 / 1366/1156/1155/2011/1150 / 2011-3 / 1151 * and AMD AM2 / AM2 + / AM3 / FM1 / FM2 / FM2 +). To simplify make the installation of the cooler with already installed motherboard can be found in the accessories again, of course, the popular Screwdriver with a magnetic tip. Installation is simple and self-explanatory - a mounting instruction (English & German) is included. The delivery is completed by the quality Chill Factor thermal compound (blister). Installation is simple and self-explanatory - a mounting instruction (English & German) is included. the delivery is completed by the quality Chill Factor thermal compound (blister). Installation is simple and self-explanatory - a mounting instruction (English & German) is included. the delivery is completed by the quality Chill Factor thermal compound (blister).